170Ton household basin injection molding machine

Selection of ejection form Servo Type Injection Molding Machine 

There are two ejection forms of Injection Molding Machine: mechanical ejection and hydraulic ejection. Some are also equipped with pneumatic ejection system. The ejection times are single and multiple. The ejection action can be manual or automatic. The ejection action is started by the mold opening stop limit switch.Servo Energy Injection Molding Machine.

Mold closing control.China Servo type Injection Molding Machine

Mold closing is to close the mold tightly with a huge mechanical thrust to resist the huge opening force of the mold caused by the high-pressure injection and filling of molten plastic during the injection molding process.Servo Injection Molding Machine 

The clamping structure of the injection molding machine includes full hydraulic type and mechanical connecting rod type. No matter what kind of structure, the clamping force is finally implemented by the complete straightening of the connecting rod. The straightening process of the connecting rod is the process of spreading the movable plate and the tail plate, and also the process of stretching the four connecting rods under the force.

Mold opening control

When the molten plastic is injected into the mold cavity and the cooling is completed, the mold opening action is followed and the product is taken out. The mold opening process is also divided into three stages. The first stage is to open the mold slowly to prevent the parts from tearing in the mold cavity. The second stage is rapid mold opening to shorten the mold opening time. The third stage is to open the mold slowly to reduce the impact and vibration caused by the mold inertia.servo motor. Servo type Injection Molding Machine